LANCOOL 215 features two pre-installed 200MM RGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
AVAILABLE IN TWO COLORS
Black
White
OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE
SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
INCLUDED FANS
Pre-installed fans ensure the case runs at peak performance.
HONEYCOMB VENTS
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
Connect2Aryans
MULTI COOLING
SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators in various sizes and configurations.
You make the call!
Front Panel
(interior)
Top Panel
Bottom Panel
(on top of the PSU shroud)
3 x 120MM fans
2 x 140MM fans
280MM radiator with max 70MM thick
360MM radiator with max 70MM thick
2 x 120MM fans
2 x 140MM fans
240MM radiator with max 55MM thick
280MM radiator with max 55MM thick
2 x 120MM fans
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.
OPTIMIZED THERMAL MANAGEMENT
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights
which create a dazzling effect through the mesh panel.
EXPERIENCE ARGB CONTROL VIA ONE BUTTON
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
HIGHLIGHTED LOGO
The LIAN LI logo glows in sync with the fans
ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights
to the motherboard, and press the button 3 seconds again to regain control of the lights.
EFFORTLESS CABLE MANAGEMENT
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
REMOVABLE/ADJUSTABLE CAGE SUPPORTS 2 X 3.5” HDD OR 1 X 3.5” HDD + 1 X 2.5” SSD
2 X SSD SUPPORT BEHIND THE MOTHERBOARD
E-ATX MOTHERBOARD COMPATIBLE
Fits motherboards with a maximum width of 280MM.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.
OPTIONAL ACCESSORIES
LANCOOL II-1X
Vertical GPU Kit
Want to show your graphics card?
Lancool II-1x is a perfect fit for the LANCOOL 215.
LANCOOL II-2X
Side Diffused ARGB LEDs Strip
Not enough RGB? Stick the LANCOOL II-2X at the top edge of your PSU shroud.
SPECIFICATIONS
Product Name
Model
Color
Dimensions
Motherboard
PSU
Materials
Incl Fans
Fan Support
Radiator
VGA Length
CPU Clearance
Drive
Slot
I/O Ports
Dust Filters
LANCOOL 215
LANCOOL 215 X/ LANCOOL 215 W
Black/ White
(D) 462mm x (W) 215mm x (H) 482mm
E-ATX(width: under 280mm)/ATX/M-ATX/ITX
210mm
Steel
4.0mm tempered glass
2 x 200MM 3-PIN 800 RPM ARGB fans (front)
1 X 120MM 3-PIN 1100 RPM Fans (rear)
Front: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm
Front: 1 x 280/360mm
Top: 1 x 240 / 280 mm
370mm
166mm
Behind MB Tray: 2 x 2.5″ SSD
Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
7
Power button
Reset button
LED button for lighting mode control
1 x HD AUDIO
2 x USB 3.0
1 x Top (magnetic), 1 x Bottom (tray)